home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
NeXTSTEP 3.3 (Developer)…68k, x86, SPARC, PA-RISC]
/
NeXTSTEP 3.3 Dev Intel.iso
/
NextDeveloper
/
Source
/
GNU
/
cc
/
explow.c
< prev
next >
Wrap
C/C++ Source or Header
|
1993-10-10
|
30KB
|
1,065 lines
/* Subroutines for manipulating rtx's in semantically interesting ways.
Copyright (C) 1987, 1991 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "config.h"
#include "rtl.h"
#include "tree.h"
#include "flags.h"
#include "expr.h"
#include "hard-reg-set.h"
#include "insn-config.h"
#include "recog.h"
#include "insn-flags.h"
#include "insn-codes.h"
/* Return an rtx for the sum of X and the integer C.
This function should be used via the `plus_constant' macro. */
rtx
plus_constant_wide (x, c)
register rtx x;
register HOST_WIDE_INT c;
{
register RTX_CODE code;
register enum machine_mode mode;
register rtx tem;
int all_constant = 0;
if (c == 0)
return x;
restart:
code = GET_CODE (x);
mode = GET_MODE (x);
switch (code)
{
case CONST_INT:
return GEN_INT (INTVAL (x) + c);
case CONST_DOUBLE:
{
HOST_WIDE_INT l1 = CONST_DOUBLE_LOW (x);
HOST_WIDE_INT h1 = CONST_DOUBLE_HIGH (x);
HOST_WIDE_INT l2 = c;
HOST_WIDE_INT h2 = c < 0 ? ~0 : 0;
HOST_WIDE_INT lv, hv;
add_double (l1, h1, l2, h2, &lv, &hv);
return immed_double_const (lv, hv, VOIDmode);
}
case MEM:
/* If this is a reference to the constant pool, try replacing it with
a reference to a new constant. If the resulting address isn't
valid, don't return it because we have no way to validize it. */
if (GET_CODE (XEXP (x, 0)) == SYMBOL_REF
&& CONSTANT_POOL_ADDRESS_P (XEXP (x, 0)))
{
tem
= force_const_mem (GET_MODE (x),
plus_constant (get_pool_constant (XEXP (x, 0)),
c));
if (memory_address_p (GET_MODE (tem), XEXP (tem, 0)))
return tem;
}
break;
case CONST:
/* If adding to something entirely constant, set a flag
so that we can add a CONST around the result. */
x = XEXP (x, 0);
all_constant = 1;
goto restart;
case SYMBOL_REF:
case LABEL_REF:
all_constant = 1;
break;
case PLUS:
/* The interesting case is adding the integer to a sum.
Look for constant term in the sum and combine
with C. For an integer constant term, we make a combined
integer. For a constant term that is not an explicit integer,
we cannot really combine, but group them together anyway.
Use a recursive call in case the remaining operand is something
that we handle specially, such as a SYMBOL_REF. */
if (GET_CODE (XEXP (x, 1)) == CONST_INT)
return plus_constant (XEXP (x, 0), c + INTVAL (XEXP (x, 1)));
else if (CONSTANT_P (XEXP (x, 0)))
return gen_rtx (PLUS, mode,
plus_constant (XEXP (x, 0), c),
XEXP (x, 1));
else if (CONSTANT_P (XEXP (x, 1)))
return gen_rtx (PLUS, mode,
XEXP (x, 0),
plus_constant (XEXP (x, 1), c));
}
if (c != 0)
x = gen_rtx (PLUS, mode, x, GEN_INT (c));
if (GET_CODE (x) == SYMBOL_REF || GET_CODE (x) == LABEL_REF)
return x;
else if (all_constant)
return gen_rtx (CONST, mode, x);
else
return x;
}
/* This is the same as `plus_constant', except that it handles LO_SUM.
This function should be used via the `plus_constant_for_output' macro. */
rtx
plus_constant_for_output_wide (x, c)
register rtx x;
register HOST_WIDE_INT c;
{
register RTX_CODE code = GET_CODE (x);
register enum machine_mode mode = GET_MODE (x);
int all_constant = 0;
if (GET_CODE (x) == LO_SUM)
return gen_rtx (LO_SUM, mode, XEXP (x, 0),
plus_constant_for_output (XEXP (x, 1), c));
else
return plus_constant (x, c);
}
/* If X is a sum, return a new sum like X but lacking any constant terms.
Add all the removed constant terms into *CONSTPTR.
X itself is not altered. The result != X if and only if
it is not isomorphic to X. */
rtx
eliminate_constant_term (x, constptr)
rtx x;
rtx *constptr;
{
register rtx x0, x1;
rtx tem;
if (GET_CODE (x) != PLUS)
return x;
/* First handle constants appearing at this level explicitly. */
if (GET_CODE (XEXP (x, 1)) == CONST_INT
&& 0 != (tem = simplify_binary_operation (PLUS, GET_MODE (x), *constptr,
XEXP (x, 1)))
&& GET_CODE (tem) == CONST_INT)
{
*constptr = tem;
return eliminate_constant_term (XEXP (x, 0), constptr);
}
tem = const0_rtx;
x0 = eliminate_constant_term (XEXP (x, 0), &tem);
x1 = eliminate_constant_term (XEXP (x, 1), &tem);
if ((x1 != XEXP (x, 1) || x0 != XEXP (x, 0))
&& 0 != (tem = simplify_binary_operation (PLUS, GET_MODE (x),
*constptr, tem))
&& GET_CODE (tem) == CONST_INT)
{
*constptr = tem;
return gen_rtx (PLUS, GET_MODE (x), x0, x1);
}
return x;
}
/* Returns the insn that next references REG after INSN, or 0
if REG is clobbered before next referenced or we cannot find
an insn that references REG in a straight-line piece of code. */
rtx
find_next_ref (reg, insn)
rtx reg;
rtx insn;
{
rtx next;
for (insn = NEXT_INSN (insn); insn; insn = next)
{
next = NEXT_INSN (insn);
if (GET_CODE (insn) == NOTE)
continue;
if (GET_CODE (insn) == CODE_LABEL
|| GET_CODE (insn) == BARRIER)
return 0;
if (GET_CODE (insn) == INSN
|| GET_CODE (insn) == JUMP_INSN
|| GET_CODE (insn) == CALL_INSN)
{
if (reg_set_p (reg, insn))
return 0;
if (reg_mentioned_p (reg, PATTERN (insn)))
return insn;
if (GET_CODE (insn) == JUMP_INSN)
{
if (simplejump_p (insn))
next = JUMP_LABEL (insn);
else
return 0;
}
if (GET_CODE (insn) == CALL_INSN
&& REGNO (reg) < FIRST_PSEUDO_REGISTER
&& call_used_regs[REGNO (reg)])
return 0;
}
else
abort ();
}
return 0;
}
/* Return an rtx for the size in bytes of the value of EXP. */
rtx
expr_size (exp)
tree exp;
{
tree size = size_in_bytes (TREE_TYPE (exp));
if (TREE_CODE (size) != INTEGER_CST
&& contains_placeholder_p (size))
size = build (WITH_RECORD_EXPR, sizetype, size, exp);
return expand_expr (size, NULL_RTX, TYPE_MODE (sizetype), 0);
}
/* Return a copy of X in which all memory references
and all constants that involve symbol refs
have been replaced with new temporary registers.
Also emit code to load the memory locations and constants
into those registers.
If X contains no such constants or memory references,
X itself (not a copy) is returned.
If a constant is found in the address that is not a legitimate constant
in an insn, it is left alone in the hope that it might be valid in the
address.
X may contain no arithmetic except addition, subtraction and multiplication.
Values returned by expand_expr with 1 for sum_ok fit this constraint. */
static rtx
break_out_memory_refs (x)
register rtx x;
{
if (GET_CODE (x) == MEM
|| (CONSTANT_P (x) && CONSTANT_ADDRESS_P (x)
&& GET_MODE (x) != VOIDmode))
{
register rtx temp = force_reg (GET_MODE (x), x);
mark_reg_pointer (temp);
x = temp;
}
else if (GET_CODE (x) == PLUS || GET_CODE (x) == MINUS
|| GET_CODE (x) == MULT)
{
register rtx op0 = break_out_memory_refs (XEXP (x, 0));
register rtx op1 = break_out_memory_refs (XEXP (x, 1));
if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
x = gen_rtx (GET_CODE (x), Pmode, op0, op1);
}
return x;
}
/* Given a memory address or facsimile X, construct a new address,
currently equivalent, that is stable: future stores won't change it.
X must be composed of constants, register and memory references
combined with addition, subtraction and multiplication:
in other words, just what you can get from expand_expr if sum_ok is 1.
Works by making copies of all regs and memory locations used
by X and combining them the same way X does.
You could also stabilize the reference to this address
by copying the address to a register with copy_to_reg;
but then you wouldn't get indexed addressing in the reference. */
rtx
copy_all_regs (x)
register rtx x;
{
if (GET_CODE (x) == REG)
{
if (REGNO (x) != FRAME_POINTER_REGNUM
#if HARD_FRAME_POINTER_REGNUM != FRAME_POINTER_REGNUM
&& REGNO (x) != HARD_FRAME_POINTER_REGNUM
#endif
)
x = copy_to_reg (x);
}
else if (GET_CODE (x) == MEM)
x = copy_to_reg (x);
else if (GET_CODE (x) == PLUS || GET_CODE (x) == MINUS
|| GET_CODE (x) == MULT)
{
register rtx op0 = copy_all_regs (XEXP (x, 0));
register rtx op1 = copy_all_regs (XEXP (x, 1));
if (op0 != XEXP (x, 0) || op1 != XEXP (x, 1))
x = gen_rtx (GET_CODE (x), Pmode, op0, op1);
}
return x;
}
/* Return something equivalent to X but valid as a memory address
for something of mode MODE. When X is not itself valid, this
works by copying X or subexpressions of it into registers. */
rtx
memory_address (mode, x)
enum machine_mode mode;
register rtx x;
{
register rtx oldx;
/* By passing constant addresses thru registers
we get a chance to cse them. */
if (! cse_not_expected && CONSTANT_P (x) && CONSTANT_ADDRESS_P (x))
return force_reg (Pmode, x);
/* Accept a QUEUED that refers to a REG
even though that isn't a valid address.
On attempting to put this in an insn we will call protect_from_queue
which will turn it into a REG, which is valid. */
if (GET_CODE (x) == QUEUED
&& GET_CODE (QUEUED_VAR (x)) == REG)
return x;
/* We get better cse by rejecting indirect addressing at this stage.
Let the combiner create indirect addresses where appropriate.
For now, generate the code so that the subexpressions useful to share
are visible. But not if cse won't be done! */
oldx = x;
if (! cse_not_expected && GET_CODE (x) != REG)
x = break_out_memory_refs (x);
/* At this point, any valid address is accepted. */
GO_IF_LEGITIMATE_ADDRESS (mode, x, win);
/* If it was valid before but breaking out memory refs invalidated it,
use it the old way. */
if (memory_address_p (mode, oldx))
goto win2;
/* Perform machine-dependent transformations on X
in certain cases. This is not necessary since the code
below can handle all possible cases, but machine-dependent
transformations can make better code. */
LEGITIMIZE_ADDRESS (x, oldx, mode, win);
/* PLUS and MULT can appear in special ways
as the result of attempts to make an address usable for indexing.
Usually they are dealt with by calling force_operand, below.
But a sum containing constant terms is special
if removing them makes the sum a valid address:
then we generate that address in a register
and index off of it. We do this because it often makes
shorter code, and because the addresses thus generated
in registers often become common subexpressions. */
if (GET_CODE (x) == PLUS)
{
rtx constant_term = const0_rtx;
rtx y = eliminate_constant_term (x, &constant_term);
if (constant_term == const0_rtx
|| ! memory_address_p (mode, y))
return force_operand (x, NULL_RTX);
y = gen_rtx (PLUS, GET_MODE (x), copy_to_reg (y), constant_term);
if (! memory_address_p (mode, y))
return force_operand (x, NULL_RTX);
return y;
}
if (GET_CODE (x) == MULT || GET_CODE (x) == MINUS)
return force_operand (x, NULL_RTX);
/* If we have a register that's an invalid address,
it must be a hard reg of the wrong class. Copy it to a pseudo. */
if (GET_CODE (x) == REG)
return copy_to_reg (x);
/* Last resort: copy the value to a register, since
the register is a valid address. */
return force_reg (Pmode, x);
win2:
x = oldx;
win:
if (flag_force_addr && ! cse_not_expected && GET_CODE (x) != REG
/* Don't copy an addr via a reg if it is one of our stack slots. */
&& ! (GET_CODE (x) == PLUS
&& (XEXP (x, 0) == virtual_stack_vars_rtx
|| XEXP (x, 0) == virtual_incoming_args_rtx)))
{
if (general_operand (x, Pmode))
return force_reg (Pmode, x);
else
return force_operand (x, NULL_RTX);
}
return x;
}
/* Like `memory_address' but pretend `flag_force_addr' is 0. */
rtx
memory_address_noforce (mode, x)
enum machine_mode mode;
rtx x;
{
int ambient_force_addr = flag_force_addr;
rtx val;
flag_force_addr = 0;
val = memory_address (mode, x);
flag_force_addr = ambient_force_addr;
return val;
}
/* Convert a mem ref into one with a valid memory address.
Pass through anything else unchanged. */
rtx
validize_mem (ref)
rtx ref;
{
if (GET_CODE (ref) != MEM)
return ref;
if (memory_address_p (GET_MODE (ref), XEXP (ref, 0)))
return ref;
/* Don't alter REF itself, since that is probably a stack slot. */
return change_address (ref, GET_MODE (ref), XEXP (ref, 0));
}
/* Return a modified copy of X with its memory address copied
into a temporary register to protect it from side effects.
If X is not a MEM, it is returned unchanged (and not copied).
Perhaps even if it is a MEM, if there is no need to change it. */
rtx
stabilize (x)
rtx x;
{
register rtx addr;
if (GET_CODE (x) != MEM)
return x;
addr = XEXP (x, 0);
if (rtx_unstable_p (addr))
{
rtx temp = copy_all_regs (addr);
rtx mem;
if (GET_CODE (temp) != REG)
temp = copy_to_reg (temp);
mem = gen_rtx (MEM, GET_MODE (x), temp);
/* Mark returned memref with in_struct if it's in an array or
structure. Copy const and volatile from original memref. */
MEM_IN_STRUCT_P (mem) = MEM_IN_STRUCT_P (x) || GET_CODE (addr) == PLUS;
RTX_UNCHANGING_P (mem) = RTX_UNCHANGING_P (x);
MEM_VOLATILE_P (mem) = MEM_VOLATILE_P (x);
return mem;
}
return x;
}
/* Copy the value or contents of X to a new temp reg and return that reg. */
rtx
copy_to_reg (x)
rtx x;
{
register rtx temp = gen_reg_rtx (GET_MODE (x));
/* If not an operand, must be an address with PLUS and MULT so
do the computation. */
if (! general_operand (x, VOIDmode))
x = force_operand (x, temp);
if (x != temp)
emit_move_insn (temp, x);
return temp;
}
/* Like copy_to_reg but always give the new register mode Pmode
in case X is a constant. */
rtx
copy_addr_to_reg (x)
rtx x;
{
return copy_to_mode_reg (Pmode, x);
}
/* Like copy_to_reg but always give the new register mode MODE
in case X is a constant. */
rtx
copy_to_mode_reg (mode, x)
enum machine_mode mode;
rtx x;
{
register rtx temp = gen_reg_rtx (mode);
/* If not an operand, must be an address with PLUS and MULT so
do the computation. */
if (! general_operand (x, VOIDmode))
x = force_operand (x, temp);
if (GET_MODE (x) != mode && GET_MODE (x) != VOIDmode)
abort ();
if (x != temp)
emit_move_insn (temp, x);
return temp;
}
/* Load X into a register if it is not already one.
Use mode MODE for the register.
X should be valid for mode MODE, but it may be a constant which
is valid for all integer modes; that's why caller must specify MODE.
The caller must not alter the value in the register we return,
since we mark it as a "constant" register. */
rtx
force_reg (mode, x)
enum machine_mode mode;
rtx x;
{
register rtx temp, insn;
if (GET_CODE (x) == REG)
return x;
temp = gen_reg_rtx (mode);
insn = emit_move_insn (temp, x);
/* Let optimizers know that TEMP's value never changes
and that X can be substituted for it. */
if (CONSTANT_P (x))
{
rtx note = find_reg_note (insn, REG_EQUAL, NULL_RTX);
if (note)
XEXP (note, 0) = x;
else
REG_NOTES (insn) = gen_rtx (EXPR_LIST, REG_EQUAL, x, REG_NOTES (insn));
}
return temp;
}
/* If X is a memory ref, copy its contents to a new temp reg and return
that reg. Otherwise, return X. */
rtx
force_not_mem (x)
rtx x;
{
register rtx temp;
if (GET_CODE (x) != MEM || GET_MODE (x) == BLKmode)
return x;
temp = gen_reg_rtx (GET_MODE (x));
emit_move_insn (temp, x);
return temp;
}
/* Copy X to TARGET (if it's nonzero and a reg)
or to a new temp reg and return that reg.
MODE is the mode to use for X in case it is a constant. */
rtx
copy_to_suggested_reg (x, target, mode)
rtx x, target;
enum machine_mode mode;
{
register rtx temp;
if (target && GET_CODE (target) == REG)
temp = target;
else
temp = gen_reg_rtx (mode);
emit_move_insn (temp, x);
return temp;
}
/* Adjust the stack pointer by ADJUST (an rtx for a number of bytes).
This pops when ADJUST is positive. ADJUST need not be constant. */
void
adjust_stack (adjust)
rtx adjust;
{
rtx temp;
adjust = protect_from_queue (adjust, 0);
if (adjust == const0_rtx)
return;
temp = expand_binop (Pmode,
#ifdef STACK_GROWS_DOWNWARD
add_optab,
#else
sub_optab,
#endif
stack_pointer_rtx, adjust, stack_pointer_rtx, 0,
OPTAB_LIB_WIDEN);
if (temp != stack_pointer_rtx)
emit_move_insn (stack_pointer_rtx, temp);
}
/* Adjust the stack pointer by minus ADJUST (an rtx for a number of bytes).
This pushes when ADJUST is positive. ADJUST need not be constant. */
void
anti_adjust_stack (adjust)
rtx adjust;
{
rtx temp;
adjust = protect_from_queue (adjust, 0);
if (adjust == const0_rtx)
return;
temp = expand_binop (Pmode,
#ifdef STACK_GROWS_DOWNWARD
sub_optab,
#else
add_optab,
#endif
stack_pointer_rtx, adjust, stack_pointer_rtx, 0,
OPTAB_LIB_WIDEN);
if (temp != stack_pointer_rtx)
emit_move_insn (stack_pointer_rtx, temp);
}
/* Round the size of a block to be pushed up to the boundary required
by this machine. SIZE is the desired size, which need not be constant. */
rtx
round_push (size)
rtx size;
{
#ifdef STACK_BOUNDARY
int align = STACK_BOUNDARY / BITS_PER_UNIT;
if (align == 1)
return size;
if (GET_CODE (size) == CONST_INT)
{
int new = (INTVAL (size) + align - 1) / align * align;
if (INTVAL (size) != new)
size = GEN_INT (new);
}
else
{
size = expand_divmod (0, CEIL_DIV_EXPR, Pmode, size, GEN_INT (align),
NULL_RTX, 1);
size = expand_mult (Pmode, size, GEN_INT (align), NULL_RTX, 1);
}
#endif /* STACK_BOUNDARY */
return size;
}
/* Save the stack pointer for the purpose in SAVE_LEVEL. PSAVE is a pointer
to a previously-created save area. If no save area has been allocated,
this function will allocate one. If a save area is specified, it
must be of the proper mode.
The insns are emitted after insn AFTER, if nonzero, otherwise the insns
are emitted at the current position. */
void
emit_stack_save (save_level, psave, after)
enum save_level save_level;
rtx *psave;
rtx after;
{
rtx sa = *psave;
/* The default is that we use a move insn and save in a Pmode object. */
rtx (*fcn) () = gen_move_insn;
enum machine_mode mode = Pmode;
/* See if this machine has anything special to do for this kind of save. */
switch (save_level)
{
#ifdef HAVE_save_stack_block
case SAVE_BLOCK:
if (HAVE_save_stack_block)
{
fcn = gen_save_stack_block;
mode = insn_operand_mode[CODE_FOR_save_stack_block][0];
}
break;
#endif
#ifdef HAVE_save_stack_function
case SAVE_FUNCTION:
if (HAVE_save_stack_function)
{
fcn = gen_save_stack_function;
mode = insn_operand_mode[CODE_FOR_save_stack_function][0];
}
break;
#endif
#ifdef HAVE_save_stack_nonlocal
case SAVE_NONLOCAL:
if (HAVE_save_stack_nonlocal)
{
fcn = gen_save_stack_nonlocal;
mode = insn_operand_mode[(int) CODE_FOR_save_stack_nonlocal][0];
}
break;
#endif
}
/* If there is no save area and we have to allocate one, do so. Otherwise
verify the save area is the proper mode. */
if (sa == 0)
{
if (mode != VOIDmode)
{
if (save_level == SAVE_NONLOCAL)
*psave = sa = assign_stack_local (mode, GET_MODE_SIZE (mode), 0);
else
*psave = sa = gen_reg_rtx (mode);
}
}
else
{
if (mode == VOIDmode || GET_MODE (sa) != mode)
abort ();
}
if (after)
{
rtx seq;
start_sequence ();
/* We must validize inside the sequence, to ensure that any instructions
created by the validize call also get moved to the right place. */
if (sa != 0)
sa = validize_mem (sa);
emit_insn (fcn (sa, stack_pointer_rtx));
seq = gen_sequence ();
end_sequence ();
emit_insn_after (seq, after);
}
else
{
if (sa != 0)
sa = validize_mem (sa);
emit_insn (fcn (sa, stack_pointer_rtx));
}
}
/* Restore the stack pointer for the purpose in SAVE_LEVEL. SA is the save
area made by emit_stack_save. If it is zero, we have nothing to do.
Put any emitted insns after insn AFTER, if nonzero, otherwise at
current position. */
void
emit_stack_restore (save_level, sa, after)
enum save_level save_level;
rtx after;
rtx sa;
{
/* The default is that we use a move insn. */
rtx (*fcn) () = gen_move_insn;
/* See if this machine has anything special to do for this kind of save. */
switch (save_level)
{
#ifdef HAVE_restore_stack_block
case SAVE_BLOCK:
if (HAVE_restore_stack_block)
fcn = gen_restore_stack_block;
break;
#endif
#ifdef HAVE_restore_stack_function
case SAVE_FUNCTION:
if (HAVE_restore_stack_function)
fcn = gen_restore_stack_function;
break;
#endif
#ifdef HAVE_restore_stack_nonlocal
case SAVE_NONLOCAL:
if (HAVE_restore_stack_nonlocal)
fcn = gen_restore_stack_nonlocal;
break;
#endif
}
if (sa != 0)
sa = validize_mem (sa);
if (after)
{
rtx seq;
start_sequence ();
emit_insn (fcn (stack_pointer_rtx, sa));
seq = gen_sequence ();
end_sequence ();
emit_insn_after (seq, after);
}
else
emit_insn (fcn (stack_pointer_rtx, sa));
}
/* Return an rtx representing the address of an area of memory dynamically
pushed on the stack. This region of memory is always aligned to
a multiple of BIGGEST_ALIGNMENT.
Any required stack pointer alignment is preserved.
SIZE is an rtx representing the size of the area.
TARGET is a place in which the address can be placed.
KNOWN_ALIGN is the alignment (in bits) that we know SIZE has. */
rtx
allocate_dynamic_stack_space (size, target, known_align)
rtx size;
rtx target;
int known_align;
{
/* Ensure the size is in the proper mode. */
if (GET_MODE (size) != VOIDmode && GET_MODE (size) != Pmode)
size = convert_to_mode (Pmode, size, 1);
/* We will need to ensure that the address we return is aligned to
BIGGEST_ALIGNMENT. If STACK_DYNAMIC_OFFSET is defined, we don't
always know its final value at this point in the compilation (it
might depend on the size of the outgoing parameter lists, for
example), so we must align the value to be returned in that case.
(Note that STACK_DYNAMIC_OFFSET will have a default non-zero value if
STACK_POINTER_OFFSET or ACCUMULATE_OUTGOING_ARGS are defined).
We must also do an alignment operation on the returned value if
the stack pointer alignment is less strict that BIGGEST_ALIGNMENT.
If we have to align, we must leave space in SIZE for the hole
that might result from the alignment operation. */
#if defined (STACK_DYNAMIC_OFFSET) || defined(STACK_POINTER_OFFSET) || defined (ALLOCATE_OUTGOING_ARGS)
#define MUST_ALIGN
#endif
#if ! defined (MUST_ALIGN) && (!defined(STACK_BOUNDARY) || STACK_BOUNDARY < BIGGEST_ALIGNMENT)
#define MUST_ALIGN
#endif
#ifdef MUST_ALIGN
#if 0 /* It turns out we must always make extra space, if MUST_ALIGN
because we must always round the address up at the end,
because we don't know whether the dynamic offset
will mess up the desired alignment. */
/* If we have to round the address up regardless of known_align,
make extra space regardless, also. */
if (known_align % BIGGEST_ALIGNMENT != 0)
#endif
{
if (GET_CODE (size) == CONST_INT)
size = GEN_INT (INTVAL (size)
+ (BIGGEST_ALIGNMENT / BITS_PER_UNIT - 1));
else
size = expand_binop (Pmode, add_optab, size,
GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT - 1),
NULL_RTX, 1, OPTAB_LIB_WIDEN);
}
#endif
#ifdef SETJMP_VIA_SAVE_AREA
/* If setjmp restores regs from a save area in the stack frame,
avoid clobbering the reg save area. Note that the offset of
virtual_incoming_args_rtx includes the preallocated stack args space.
It would be no problem to clobber that, but it's on the wrong side
of the old save area. */
{
rtx dynamic_offset
= expand_binop (Pmode, sub_optab, virtual_stack_dynamic_rtx,
stack_pointer_rtx, NULL_RTX, 1, OPTAB_LIB_WIDEN);
size = expand_binop (Pmode, add_optab, size, dynamic_offset,
NULL_RTX, 1, OPTAB_LIB_WIDEN);
}
#endif /* SETJMP_VIA_SAVE_AREA */
/* Round the size to a multiple of the required stack alignment.
Since the stack if presumed to be rounded before this allocation,
this will maintain the required alignment.
If the stack grows downward, we could save an insn by subtracting
SIZE from the stack pointer and then aligning the stack pointer.
The problem with this is that the stack pointer may be unaligned
between the execution of the subtraction and alignment insns and
some machines do not allow this. Even on those that do, some
signal handlers malfunction if a signal should occur between those
insns. Since this is an extremely rare event, we have no reliable
way of knowing which systems have this problem. So we avoid even
momentarily mis-aligning the stack. */
#ifdef STACK_BOUNDARY
/* If we added a variable amount to SIZE,
we can no longer assume it is aligned. */
#if !defined (SETJMP_VIA_SAVE_AREA) && !defined (MUST_ALIGN)
if (known_align % STACK_BOUNDARY != 0)
#endif
size = round_push (size);
#endif
do_pending_stack_adjust ();
/* Don't use a TARGET that isn't a pseudo. */
if (target == 0 || GET_CODE (target) != REG
|| REGNO (target) < FIRST_PSEUDO_REGISTER)
target = gen_reg_rtx (Pmode);
mark_reg_pointer (target);
#ifndef STACK_GROWS_DOWNWARD
emit_move_insn (target, virtual_stack_dynamic_rtx);
#endif
/* Perform the required allocation from the stack. Some systems do
this differently than simply incrementing/decrementing from the
stack pointer. */
#ifdef HAVE_allocate_stack
if (HAVE_allocate_stack)
{
enum machine_mode mode
= insn_operand_mode[(int) CODE_FOR_allocate_stack][0];
if (insn_operand_predicate[(int) CODE_FOR_allocate_stack][0]
&& ! ((*insn_operand_predicate[(int) CODE_FOR_allocate_stack][0])
(size, mode)))
size = copy_to_mode_reg (mode, size);
emit_insn (gen_allocate_stack (size));
}
else
#endif
anti_adjust_stack (size);
#ifdef STACK_GROWS_DOWNWARD
emit_move_insn (target, virtual_stack_dynamic_rtx);
#endif
#ifdef MUST_ALIGN
#if 0 /* Even if we know the stack pointer has enough alignment,
there's no way to tell whether virtual_stack_dynamic_rtx shares that
alignment, so we still need to round the address up. */
if (known_align % BIGGEST_ALIGNMENT != 0)
#endif
{
target = expand_divmod (0, CEIL_DIV_EXPR, Pmode, target,
GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT),
NULL_RTX, 1);
target = expand_mult (Pmode, target,
GEN_INT (BIGGEST_ALIGNMENT / BITS_PER_UNIT),
NULL_RTX, 1);
}
#endif
/* Some systems require a particular insn to refer to the stack
to make the pages exist. */
#ifdef HAVE_probe
if (HAVE_probe)
emit_insn (gen_probe ());
#endif
return target;
}
/* Return an rtx representing the register or memory location
in which a scalar value of data type VALTYPE
was returned by a function call to function FUNC.
FUNC is a FUNCTION_DECL node if the precise function is known,
otherwise 0. */
rtx
hard_function_value (valtype, func)
tree valtype;
tree func;
{
return FUNCTION_VALUE (valtype, func);
}
/* Return an rtx representing the register or memory location
in which a scalar value of mode MODE was returned by a library call. */
rtx
hard_libcall_value (mode)
enum machine_mode mode;
{
return LIBCALL_VALUE (mode);
}
/* Look up the tree code for a given rtx code
to provide the arithmetic operation for REAL_ARITHMETIC.
The function returns an int because the caller may not know
what `enum tree_code' means. */
int
rtx_to_tree_code (code)
enum rtx_code code;
{
enum tree_code tcode;
switch (code)
{
case PLUS:
tcode = PLUS_EXPR;
break;
case MINUS:
tcode = MINUS_EXPR;
break;
case MULT:
tcode = MULT_EXPR;
break;
case DIV:
tcode = RDIV_EXPR;
break;
case SMIN:
tcode = MIN_EXPR;
break;
case SMAX:
tcode = MAX_EXPR;
break;
default:
tcode = LAST_AND_UNUSED_TREE_CODE;
break;
}
return ((int) tcode);
}